Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-1852001.png)
Blower Motor Resistor: Service and Repair
Auxiliary Blower Motor Resistor
Auxiliary Blower Motor Resistor
Removal
1. Disconnect the battery ground cable.
2. Remove the floor console upper panel.
3. Disconnect the blower motor resistor electrical connector.
-
Reposition the wiring harness.
4. Remove the blower motor resistor.
-
Remove the screw.
Installation
1. Install the blower motor resistor.
-
Install the screw.
2. Connect the blower motor resistor electrical connector.
-
Reposition the wiring harness.
3. Install the floor console upper panel.
4. Connect the battery ground cable.
