Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-1854002.png)
-
Release the 2 clips.
-
Disconnect the electrical connector.
-
Disconnect the hose.
Installation
1. Install the in-vehicle temperature sensor.
-
Connect the hose.
-
Connect the electrical connector.
-
Secure the clips.
2. Install the steering column gaiter panel.
-
Secure with the clips.
-
Tighten the Torx screws.
3. Install the steering column side trim panels.
-
Secure with the clips.
4. Install the steering column shrouds.
5. Install the instrument panel access panel.
