Range Rover (LM) V8-4.4L (2009)
8. Remove the right-hand front footwell duct.
-
Remove the 2 screws.
Left-hand drive vehicles
9. Left-hand drive vehicles
-
Remove the 3 screws.
-
Remove the electrical connector.
10. Remove the passenger side footwell duct.
-
Remove the screw.
All vehicles
11. Remove the thermostatic expansion valve cover.
-
Release the wiring harness from the 2 tangs.
-
Remove the 4 screws.
CAUTION: Make sure that all openings are sealed. Use new blanking caps.
12. Remove the thermostatic expansion valve.
-
Remove the 2 bolts.
-
Remove the 2 A/C pipe clamps.
-
Remove the A/C pipes.
-
Remove and discard the O-rings.
Installation
All vehicles
1. Install the thermostatic expansion valve.
-
Remove the blanking caps from the ports.
-
Clean the component mating faces.
-
Lubricate and install the new O-rings.
-
Install the A/C pipes.
-
Install the 2 A/C pipe clamps.