Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-1875004.png)
12. Disconnect the floor duct actuator motor electrical connector.
13. Release the evaporator temperature sensor from the heater and evaporator core housing.
14. Remove the heater and evaporator core housing lower cover.
-
Remove the 7 screws.
-
Remove the 4 clips.
15. Remove the heater core.
Installation
1. Install the heater core.
2. Install the heater and evaporator core housing lower cover.
-
Install the screws.
-
Install the clips.
