Range Rover (LM) V8-4.4L (2009)
Heater Core Case: Service and Repair
Plenum Chamber
Service Repair No - 80.15.62
Removal
1. Secure the hood in the service position.
^
Release the support struts.
2. Disconnect the battery ground cable.
3. Release the hood seal from the plenum chamber.
4. Disconnect the battery positive cable from the bulkhead.
^
Release the cover.
^
Remove the nut.
5. Remove the plenum chamber.
^
Remove the 2 nuts.
6. Remove the air intake cover.
^
Remove the 3 screws.
NOTE: Do not disassemble further if the component is removed for access only.
7. Remove the pollen filter.
Installation