Range Rover (LM) V8-4.4L (2009)
10. Remove the grommet.
11. CAUTION: Make sure that all openings are sealed. Use new blanking caps.
Disconnect the 2 A/C refrigerant lines.
^
Remove the 2 bolts.
^
Remove and discard the 2 O-ring seals.
^
Install blanking caps to the exposed ports.
^
Remove the grommet.
12. Release the heater and evaporator core housing from the bulkhead.
^
Remove the 3 nuts.
13. Reposition the windshield wiper motor for access.
^
Mark the position of the wiper linkage to aid assembly.
^
Remove the windshield wiper motor to wiper linkage assembly nut.
^
Remove the windshield wiper motor to support bracket bolts.
14. Release the in-vehicle crossbeam from the bulkhead.
^
Remove the 2 bolts.