Range Rover (LM) V8-4.4L (2009)
Vehicles with navigation system
CAUTION: over fibre optic cable connectors to minimise dust ingress and avoid bending the cables in a radius of less than 30 mm.
9. Remove the navigation system display module.
^
Remove the 4 Torx screws.
^
Disconnect the fibre optic connector.
^
Disconnect the 2 electrical connectors.
All vehicles
10. Release the heater duct.
^
Remove the 3 clips.
11. Release the LH wiring harness from the instrument panel center reinforcement.
^
Release the clip.
12. Release the RH wiring harness from the instrument panel center reinforcement.
^
Release the clip.