Range Rover (LM) V8-4.4L (2009)
13. Remove the instrument panel center reinforcement.
^
Remove the 8 Torx screws.
^
Release the 4 clips.
Installation
All vehicles
1. Install the instrument panel center reinforcement.
^
Secure the clips.
^
Tighten the Torx screws.
2. Secure the wiring harnesses.
^
Secure with the clips.
3. Attach the heater duct.
^
Install the clips.
Vehicles with navigation system
4. Install the navigation system display module.
^
Connect the electrical connectors.
^
Connect the fibre optic connector.
^
Tighten the Torx screws.
All vehicles
5. Install the passenger side closing trim panel.
^
Connect the electrical connector.
^
Secure the clip.
^
Tighten the screws.
6. Install the driver side closing trim panel.
^
Connect the electrical connector.
^
Secure the clip.
^
Tighten the screws.
7. Install the cigar lighter assembly.
^
Tighten the screws.