Range Rover (LM) V8-4.4L (2009)
Tailgate Wiring Harness
Removal
1. Disconnect the battery ground cable.
2. Remove the tailgate trim panel.
3. Disconnect the 5 electrical connectors.
4. Release the 6 harness clips.
5. Release the tailgate wiring harness.
-
Release the grommet.
6. Release the luggage compartment floor covering.
7. Disconnect the tailgate harness electrical connector from the body harness.
8. Remove the tailgate wiring harness.
Installation
1. Install the tailgate wiring harness.
2. Connect the tailgate harness electrical connector to the body harness.
3. Connect the electrical connectors.
4. Install the tailgate trim panel.
5. Secure the luggage compartment floor covering.
6. Connect the battery ground cable.