Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-1063001.png)
Accelerator Pedal: Service and Repair
Accelerator Pedal
Removal
1. Remove the driver side closing trim panel.
^
Release the clip.
^
Remove the 2 screws.
^
Disconnect the electrical connector.
2. Remove the accelerator pedal assembly.
^
Release the wiring harness.
^
Remove the 3 nuts.
^
Disconnect the electrical connector.
NOTE: Do not disassemble further if the component is removed for access only.
3. Remove the accelerator pedal bracket.
^
Remove the 3 nuts and bolts.