Range Rover (LM) V8-4.4L (2009)
Installation
1. Attach the accelerator pedal bracket.
^
Tighten the nuts and bolts to 10 Nm (7 ft. lbs.).
NOTE: Make sure the electrical connector is securely connected.
2. Install the accelerator pedal assembly.
^
Connect the electrical connector.
^
Tighten the nuts to 25 Nm (18 ft. lbs.).
^
Secure the wiring harness.
3. Install the closing trim panel.
^
Connect the electrical connector.
^
Secure the clip.
^
Tighten the screws.
4. Initiate a new accelerator pedal using T4.