Range Rover (LM) V8-4.4L (2009)
10. Release the engine wiring harness clips.
^
Release the 4 clips.
^
Remove the 2 bolts.
11. Disconnect the fuel injector electrical connectors.
12. Disconnect the engine gas recirculation modulator electrical connection.
13. Disconnect the fuel temperature sensor electrical connector.
NOTE: Do not disassemble further if the component is removed for access only.
14. Remove the fuel rail.
^
Remove the 4 Torx bolts.
^
Remove and discard the fuel injector O-ring seals.