Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-1090004.png)
15. Remove the fuel temperature sensor.
16. Remove the fuel injectors.
^
Remove the retaining clips.
^
Release the fuel injectors.
^
Remove and discard the fuel injector O-ring seals.
Installation
1. Clean the components.
2. Install the fuel injectors to the fuel rail.
^
Install fuel injector O-ring seals.
^
Lubricate the O-ring seals with clean engine oil.
^
Install the fuel injectors.
^
Secure the fuel injector retaining clips.
3. Install the fuel temperature sensor.
^
Tighten the sensor to 10 Nm (7 ft. lbs.).
4. Install the fuel rail.
^
Install fuel injector O-ring seals.
^
Lubricate the O-ring seals with clean engine oil.
5. Connect the fuel temperature sensor electrical connector.
6. Connect the fuel injector electrical connectors.
7. Connect the engine wiring harness to the intake manifold.
^
Tighten the M6 bolts to 10 Nm (7 ft. lbs.).
WARNING: After carrying out repairs, the fuel system must be checked visually for leaks. Failure to follow this instruction may result in
personal injury.