Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-1091002.png)
10. Remove the container.
^
Dispose of the collected fuel in accordance with local regulations.
^
Clean any fuel residue remaining in the container.
11. Release the air suspension pipes from the fuel tank filler pipe.
^
Remove and discard the 3 tie straps.
12. Remove the fuel tank filler pipe from the vehicle body.
^
Remove the 2 nuts.
^
Disconnect the breather hose from the fuel tank filler pipe.
Installation
1. Install the fuel tank filler pipe to the vehicle body.
^
Install the nuts.
^
Connect the breather hose to the fuel tank filler pipe.
^
Install the clip.
2. Secure the air suspension pipes to the fuel tank filler pipe.
^
Install new tie straps.
3. Install the fuel tank filler pipe hose to the fuel tank filler pipe.
4. Secure the breather hose to the fuel tank filler pipe.
^
Install a new clip.
5. Install the RH fuel tank shield.
^
Tighten the nuts and bolts to 25 Nm (18 ft. lbs.).
6. Install the RH rear fender splash shield.
7. Install the rear driveshaft.
8. Fill the fuel tank with the amount recovered during the fuel tank drain procedure.
9. Connect the battery ground cable.
