Range Rover (LM) V8-4.4L (2009)
Fuel Gauge Sender: Service and Repair
Fuel Pump Module
Special Service Tools
Wrench, Fuel Tank Module (LRT-19-009)
310-118
Removal
NOTE: The fuel pump module consists of the fuel pump and fuel gauge sender units that cannot be serviced separately.
1. Drain the fuel tank.
2. Remove the RH fuel tank access cover.
^
Remove the 4 nuts.
3. Position a container to collect the fluid spillage.
CAUTION: Before disconnecting or removing components, ensure the area around the joint faces and connections are clean. Plug open
connections to prevent contamination.
4. Release the fuel filter.
^
Using the special tool, remove the fuel tank module locking ring.
^
Disconnect the fuel supply line.
^
Disconnect the electrical connector.