Range Rover (LM) V8-4.4L (2009)
10. NOTE: Do not disassemble further if the component is removed for access only.
Remove the steering column control switch.
^
Carefully release the clip.
11. Remove the LH steering column multifunction switch.
^
Release the 2 clips.
12. Remove the RH steering column multifunction switch.
^
Release the 2 clips.
Installation
1. Install RH steering column multifunction switch.
2. Install LH steering column multifunction switch.
3. Install the steering column control switch.
4. NOTE: If the SRS component is to be replaced, the bar code of the new unit must be recorded.
Install the clockspring.
^
Install the 4 screws.
^
Connect the 5 electrical connectors.
5. Install the steering column upper shroud.
6. Install the steering column lower shroud.
^
Install the 3 screws.
7. Attach the steering column extension gaiter.
8. Install the steering wheel.
9. Connect the battery ground cable.
10. Return the steering column to its original position.