landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Side Air Curtain Module|Page 6034 > < Seat Position Sensor|Locations|Page 6029
Page 1
background image

Side Air Bag: Service and Repair
Side Air Curtain Module

Side Air Curtain Module 

Service Repair No - 76.74.40

Removal

WARNING:
^

Persons working on the supplemental restraint system (SRS) must be fully trained and have been issued with the safety guidelines.

^

Allow a period of 10 minutes to elapse after disconnecting the battery before undertaking any work on the SRS.

^

The SRS electrical connectors are unique. DO NOT force, or attempt to connect electrical connectors to the wrong sockets.

^

The correct procedures must always be used when working on SRS components.

^

It is imperative that before any work is undertaken on the SRS system, the appropriate information is read thoroughly.

^

Always disconnect both battery cables before beginning work on the SRS system. Disconnect the ground cable first. Never reverse
connect the battery.

^

Take extra care when handling SRS components.

1. Disconnect the battery ground cable.
2. Make the air bag supplemental restraint system (SRS) safe.
3. Remove the headliner.
4. Disconnect the electrical connector from the side air curtain module.

5. Remove the side air curtain module.

^

Remove the 4 screws.

Installation

1. Install the side air curtain module.

^

Tighten the new screw to 10 Nm (7 ft. lbs.).

2. Connect the side air curtain module electrical connector.
3. Install the headliner.
4. Connect the battery ground cable.

Side Air Curtain Module|Page 6034 > < Seat Position Sensor|Locations|Page 6029