Range Rover (LM) V8-4.4L (2009)
Seat Belt Latch: Service and Repair
Rear Center Safety Belt Buckle
Rear Center Safety Belt Buckle
Service Repair No - 76.73.64
Removal
1. Fold the rear seat fully forwards.
^
Release the rear seat backrest catch.
2. Remove the rear seat backrest inner hinge cover.
^
Remove the 3 screws.
3. Remove the rear seat backrest inner hinge.
^
Remove the 4 bolts.
^
Discard the 2 lower bolts.
4. Remove the rear safety belt buckle.
^
Remove and discard the bolt.
Installation
1. Install the rear safety belt buckle.
^
Install the new bolt and tighten to 25 Nm (18 ft. lbs.).
2. Install the rear seat backrest inner hinge.
^
Install the 2 upper bolts.
^
Install the 2 new lower bolts.
^
Tighten the bolts to 25 Nm (18 ft. lbs.).
3. Install the rear seat backrest inner hinge cover.
^
Install the 3 screws.
4. Fold the rear seat fully rearwards.
^
Secure the rear seat backrest catch.