Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-1965001.png)
Seat Belt Latch: Service and Repair
Rear Safety Belt Buckle
Rear Safety Belt Buckle
Service Repair No - 76.73.30
Removal
1. Remove the rear seat.
2. Remove the rear seat backrest inner hinge cover.
^
Remove the 3 screws.
3. Remove the rear seat backrest outer hinge cover.
^
Remove the 2 screws.
4. Remove the rear seat base lower trim panel.
^
Remove the 6 clips.
^
Reposition the rear seat hinge plates for access.
5. Release the rear seat cushion cover from the rear seat base.
6. Reposition the rear seat cushion and seat cushion cover for access.
7. Remove the LH rear safety belt buckle.
^
Remove and discard the bolt.
