Range Rover (LM) V8-4.4L (2009)
Installation
1. Install the LH rear safety belt buckle.
^
Install the new bolt and tighten to 25 Nm (18 ft. lbs.).
2. Reposition the rear seat cushion and seat cushion cover for access.
3. Secure the rear seat cushion cover to the rear seat base.
4. Install the rear seat base lower trim panel.
^
Install the 6 clips.
^
Reposition the rear seat hinge plates for access.
5. Install the rear seat backrest outer hinge cover.
^
Remove the 2 screws.
^
Install the 2 screws.
6. Install the rear seat backrest inner hinge cover.
^
Install the 3 screws.
7. Install the rear seat.