Range Rover (LM) V8-4.4L (2009)
Installation
1. Install the generator.
^
Install and tighten the generator upper fixing bolt, before the lower bolts.
^
Tighten the 3 bolts to 48 Nm (35 ft. lbs.).
2. Connect the battery positive cable and generator electrical connector.
^
Tighten the nut to 10 Nm (7 ft. lbs.).
^
Reposition the rubber insulator.
3. Secure the accessory drive belt.
^
Rotate the tensioner assembly counter-clockwise.
4. Install the radiator splash shield.
5. Install the coolant expansion tank support bracket.
^
Tighten the bolts to 7 Nm (5 ft. lbs.).
6. Connect the battery ground cable.
7. Install the coolant expansion tank.