Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-1532001.png)
Alternator: Service and Repair
Generator
Removal
1. Disconnect the battery ground cable.
2. Remove the coolant expansion tank.
3. Remove the coolant expansion tank support bracket.
^
Remove the 3 bolts.
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
4. Raise and support the vehicle.
5. Remove the radiator splash shield.
6. Release the accessory drive belt.
^
Rotate the tensioner assembly counter-clockwise.
^
Release the accessory drive belt from the generator pulley.
7. Disconnect the battery positive cable and the generator electrical connector.
^
Reposition the rubber insulator.
^
Remove the nut.
8. Remove the generator.
^
Remove the 3 bolts.
