Range Rover (LM) V8-4.4L (2009)
Steering Shaft: Service and Repair
Steering Column Shaft
Service Repair No - 57.40.22
Removal
1. Disconnect the battery ground cable.
2. Remove the driver side closing trim panel.
^
Release the clip.
^
Remove the 2 screws.
^
Disconnect the electrical connector.
3. Disconnect the steering column intermediate shaft from the steering column.
^
Note the fitted position.
^
Remove the special bolt and discard the nut.
4. Disconnect the steering column intermediate shaft from the lower shaft.
^
Note the fitted position.
^
Remove and discard the bolt.
5. Remove the steering column intermediate shaft.
^
Release the 2 grommets.
NOTE:
Do not disassemble further if the component is removed for access only.
NOTE:
Note the fitted position.