Range Rover (LM) V8-4.4L (2009)
6. Remove the 2 intermediate shaft grommets.
Installation
1. Install the steering column intermediate shaft.
^
Install the grommets.
2. Connect the steering column intermediate shaft to the lower shaft.
^
Tighten the new bolt to 25 Nm (18 ft. lbs.).
3. Connect the steering column intermediate shaft to the steering column.
^
Install the special bolt and tighten the new nut to 22 Nm (16 ft. lbs.).
4. Install the driver side closing trim panel.
^
Connect the electrical connector.
^
Secure the clip.
^
Tighten the screws.
5. Connect the battery ground cable.