Range Rover (LM) V8-4.4L (2009)
Ball Joint: Service and Repair
Front Suspension
Rear Lower Arm Ball Joint
Service Repair No - 60.15.04
Special Service Tools
Removal
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
1. Raise and support the vehicle.
2. Remove the front wheels and tires.
3. Release the LH suspension height sensor link.
CAUTION: Make sure the ball joint seal is not damaged. A damaged seal will lead to the premature failure of the joint.
4. Using the special tool, release the LH front lower arm from the wheel knuckle.
^
Remove the nut.
NOTE:
LH illustration shown, RH is similar.
5. Remove the LH front lower arm.
^
Remove and discard the nut and bolt.