Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-1727004.png)
^
Tighten the nuts and bolts to 110 Nm (81 ft. lbs.).
10. Secure the air suspension lines.
^
Secure in the clips.
11. Secure the LH and RH ABS wiring harnesses.
^
Secure the brake pad wear sensor wiring harness.
^
Secure in the clips.
12. Secure the LH and RH brake pipes.
^
Tighten the bolts to 5 Nm (4 ft. lbs.).
13. Connect the electrical connectors to the LH and RH rear height sensors.
14. Install the rear driveshaft.
15. Using the Land Rover approved diagnostic system, pressurize the air suspension.
16. Install the rear wheels and tires.
^
Tighten the wheel nuts to 140 Nm (103 ft. lbs.).
17. Lower the vehicle.
