Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-1744002.png)
^
Disconnect the air compressor outlet line.
^
Release the air suspension reservoir solenoid valve block, from the compressor mounting bracket.
8. Remove the air suspension compressor assembly.
^
Remove the 4 bolts.
NOTE:
Do not disassemble further if the component is removed for access only.
NOTE:
Note the fitted position of the washers.
9. Remove the air suspension compressor lower cover.
^
Remove and discard the 4 retainers.
^
Collect the 4 bolts and washers.
10. Remove the air suspension compressor.
^
Remove the 3 bolts.
^
Release the electrical connector from the clip.
^
Disconnect and remove the air suspension compressor inlet line.
^
Remove the air suspension compressor muffler.
