Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-1772008.png)
7. Remove the nylon retaining pin.
8. Remove the rebound plate and spring aid.
9. Remove the air spring.
^
Using a soft faced mallet, gently tap the sleeve support upwards to release it from the O-ring seals.
^
Remove and discard the 2 O-ring seals.
10. Remove the shock absorber from the vise.
Installation
1. Install the shock absorber in the vise.
2. Clean the components.
3. Lubricate and install new O-rings to the seal carrier.
4. Install the spring aid and rebound plate.
5. Install the air spring.
^
Align the piston with the first O-ring seal, making sure the location tag is correctly aligned.
