Range Rover (LM) V8-4.4L (2009)
Removal
NOTE:
This procedure should also be used to remove the rear air spring.
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
1. Raise and support the vehicle.
2. Remove the wheel and tire.
3. Remove the shock absorber and spring assembly.
4. Remove the gaiter.
^
Remove and discard the 2 straps.
5. Remove the nut, rebound washer and rubber bushing.
^
Discard the nut.
6. Remove and discard the O-ring seals and spacer.