Range Rover (LM) V8-4.4L (2009)
Suspension Strut / Shock Absorber: Overhaul
Shock Absorber and Spring Assembly
Disassembly
WARNING: Ensure the spring compressor Safe Working Load (SWL) meets or exceeds the spring rating quoted in the Specifications
section.
WARNING: Always follow the spring compressor manufacturer's instructions.
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
1. Raise and support the vehicle.
2. Remove the shock absorber and spring assembly.
3. Install a suitable spring compressor in a vise.
4. Install the shock absorber and spring assembly in the spring compressor.
^
Compress the spring just sufficiently to relieve the spring tension.
5. Remove the shock absorber.
^
Restrain the shock absorber spindle, remove and discard the nut.
^
Remove the upper bush rebound plate and upper bush.
^
Remove the upper mounting assembly.
^
Remove the dust tube and rebound plate assembly.
^
Remove the spring aid.
6. Remove the spring from the spring compressor.
7. Clean and inspect the components for deterioration.
^
To aid reassembly, mark the position of the rubber insulator in relation to the upper mounting plate.
^
Remove the rubber insulator.
^
Remove the spacer.
^
Remove the rebound plate from the dust tube.
Assembly
1. Install the spring in the spring compressor.