Range Rover (LM) V8-4.4L (2009)
^
Make sure the spring is installed with the close coils positioned towards the top of the shock absorber.
2. Install the spring aid.
3. Install the dust tube.
^
Install the rebound plate into the dust tube.
4. Install the shock absorber.
^
Make sure the spring is correctly located in the spring seat.
5. Install the upper mounting.
^
Install the spacer and rubber insulator, making sure the spacer drops over the stud heads and the insulator is aligned with the mark made
previously.
^
Install the upper bush and upper bush rebound plate.
^
Install a new nut and tighten to 98 Nm (72 ft. lbs.).
6. Install the shock absorber and spring assembly.