Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-1237002.png)
^
Install 307-509-2 to 307-509-1 and extract the seal.
Installation
1. Using 307-509-3, install the selector shaft seal.
^
Clean the components.
2. RH side only: Install the selector cable and lever.
^
Tighten the nut to 12 Nm (9 ft. lbs.).
^
Tighten the bolts to 10 Nm (7 ft. lbs.).
