Range Rover (LM) V8-4.4L (2009)
Seals and Gaskets: Service and Repair
Output Shaft Seal
Output Shaft Seal
Service Repair No - 44.20.21
Special Service Tools
Removal
1. Disconnect the battery ground cable.
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
2. Raise and support the vehicle.
3. Remove the transfer case.
CAUTION: Care must be taken to avoid damage to the seal register and running surface.
4. Remove the transmission output shaft oil seal.
^
Use the special tool.
Installation
CAUTION: Oil seals must be fitted dry.
1. Install a new transmission output shaft oil seal.
^
Clean the seal register.
^
Use the special tool.