Range Rover (LM) V8-4.4L (2009)
4. Remove the special tool.
^
Install special tool 205-821-01 to the seal face.
CAUTION: Make sure adaptor is removed or damage to the vehicle may occur.
5. Using the special tool, install the new drive pinion seal.
^
Remove the special tools.
CAUTION: Make sure the drive pinion flange scribed marks are aligned.
6. Install the drive pinion flange.
CAUTION: Make sure the mark on the drive pinion nut is never tightened short of the scribed mark on the drive pinion shaft.
CAUTION: Make sure the drive pinion flange has no end float and is free to rotate.
CAUTION: Make sure the scribed mark on the drive pinion nut is no more than a maximum of 5 degrees past the scribed mark on the
drive pinion shaft.
7. Install the drive pinion flange retaining nut.
^
Using the special tool, counter hold the drive pinion flange.
^
Install nut to previously noted number of turns.
^
Measure the depth of the pinion nut on the pinion shaft.