Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-1290004.png)
11. Position a container to collect the fluid spillage.
12. Install the special tool, to the inner halfshaft joint.
CAUTION: Keep the halfshaft horizontal to avoid damaging the seal.
13. LH front: Release the halfshaft from the differential housing.
^
Reposition the halfshaft.
14. Remove and discard the clip from the LH halfshaft.
15. Using the special tools, remove and discard the halfshaft seal.
Installation
CAUTION: The halfshaft seal protector must be left in place until the halfshaft has been installed.
1. Using the special tools, install a new halfshaft seal.
^
Clean the component mating faces.
