Range Rover (LM) V8-4.4L (2009)
4. Remove the LH front brake disc.
5. Release the LH front anti-lock brake system (ABS) sensor and wiring harness.
^
Release the clip.
^
Remove the bolt.
6. Loosen the LH tie rod end locking nut.
CAUTION: Make sure the ball joint seal is not damaged. A damaged seal will lead to the premature failure of the joint.
7. Using the special tool release the LH tie rod end.
^
Remove and discard the nut.
8. LH side front: Release the suspension height sensor.
9. Using the special tool release the LH front lower arm.
^
Remove the nut.
^
Loosen the nut and bolt.