Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-1295004.png)
10. Using the special tool release the LH rear lower arm.
^
Loosen the nut and bolt.
^
Remove the nut.
11. Using the special tools, release the halfshaft from the wheel hub.
12. Remove the special tools.
13. Position a container to collect the fluid spillage.
14. Install the special tool, to the inner halfshaft joint.
15. LH front: Release the halfshaft from the differential housing.
16. Release the halfshaft from the wheel hub.
CAUTION: Keep the halfshaft horizontal to avoid damaging the seal.
17. Remove the halfshaft.
^
Remove the special tool.
18. Remove and discard the clip from the LH halfshaft.
19. Using the special tools, remove and discard the halfshaft seal.
