Range Rover (LM) V8-4.4L (2009)
9. Secure the LH tie rod end.
^
Install new nut and tighten to 80 Nm (59 ft. lbs.).
10. Secure the LH front ABS sensor and wiring harness.
^
Apply anti-seize compound to the ABS sensor.
^
Tighten the bolt to 8 Nm (6 ft. lbs.)
^
Secure in the clip.
11. Install the LH front brake disc.
12. With assistance tighten the wheel hub nut to 420 Nm (311 ft. lbs.).
^
Use a new nut.
^
Stake the nut to the halfshaft.
13. Install the LH front road wheel and tire.
^
Tighten the wheel nuts to 140 Nm (103 ft. lbs.).
14. Check and top-up the differential case.
15. Check, and if necessary, adjust the wheel alignment.
Front Halfshaft RH
Front Halfshaft RH
Service Repair No - 47.10.02
Special Service Tools