Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-1296003.png)
7. Using the special tools, remove and discard the halfshaft oil seal.
Installation
CAUTION: The seal protector must be left in place until the halfshaft has been installed.
1. Using the special tools, install a new halfshaft oil seal.
^
Clean the component mating faces.
CAUTION: Pull on the halfshaft inboard joint to make sure the clip has fully engaged and retains the halfshaft inboard joint within the
differential case.
2. With assistance, install the halfshaft.
