Range Rover (LM) V8-4.4L (2009)
^
Clean the component mating faces.
^
Install the snap ring.
^
Open the halfshaft oil seal protector.
3. NOTE:
The oil seal protector is designed to break into two pieces.
Remove and discard the halfshaft oil seal protector.
4. Install the wheel knuckle.
5. Install the wheels and tires.
^
Tighten the wheel nuts to 140 Nm (103 ft. lbs.).
CAUTION: Do not fill the differential with lubricant up to the filler plug. The filler plug is only used to fill the deferential with lubricant,
and not to act as a level indicator.
6. Fill the differential with the correct amount of lubricant.