Range Rover (LM) V8-4.4L (2009)
Seals and Gaskets: Service and Repair
Transfer Case Input Shaft Seal
Transfer Case Input Shaft Seal - 4.4L
Service Repair No - 41.20.50
Special Service Tools
Removal
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
1. Raise and support the vehicle.
2. Remove the transfer case.
CAUTION: Care must be taken to avoid damage to the seal register and running surface.
3. Carefully remove and discard the oil seal.
^
Use the special tool.
Installation
CAUTION: Oil seals must be fitted dry.
1. Install a new seal.
^
Clean the seal register.
^
Use the special tool.