Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-1351002.png)
2. Install the transfer case.
Transfer Case Front Output Shaft Seal
Transfer Case Front Output Shaft Seal - 4.4L
Service Repair No - 41.20.51
Special Service Tools
Removal
1. Disconnect the battery ground cable.
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
2. Raise and support the vehicle.
3. Drain the transfer case fluid.
4. Remove the transfer case.
5. With assistance, secure the transfer case with its transmission mating face down on a flat surface.
^
Secure with 2 bolts.
WARNING: Eye protection must be worn.
