Range Rover (LM) V8-4.4L (2009)
Rotate the assembly to engage the clutch plates.
NOTE:
Use circlip pliers to open the actuator levers.
8. Install the clutch.
^
Clean the components.
^
Engage the actuator levers.
CAUTION: The dark links in the chain face up as shown.
NOTE:
The relieved splined inner diameter of the sprocket must face up as shown.
9. Install the chain and sprocket.
^
Clean the components.
10. Apply a 2 mm bead of sealant to one surface of the transfer case mating face, as shown.
^
Clean the component mating faces.
^
Clean the dowels and dowel holes.
^
Apply a 2 mm bead of sealant to one surface of the transfer case mating face, as shown.
11. Install the front half of the transfer case.
^
Evenly tighten the 2 Torx bolts shown to 35 Nm (26 ft. lbs.).