Range Rover (LP) V8-4.6L (2001)
^
Hold the shaft with the tool and release the spindle nut one "flat." (Figure 6)
^
Remove the tool.
7.
If the plastic motor clip is broken, or breaks during motor removal, perform the following:
^
Remove the broken clip by levering it off. (Figure 7)
CAUTION:
It is critical that the plastic clip is fully engaged into the steering column aluminum body. There will be a loud snapping noise as the clip
engages.
^
Align the key on the new plastic motor retaining clip with the machined slot on the aluminum body of the column
^
Snap the new clip into position.
^
Verify that the key is located in the slot and the clip is securely located.