landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Center Dash Panel|Page 10349 > < Center Dash Panel|Page 10347
Page 1
background image

Dashboard / Instrument Panel: Service and Repair

Center Dash Panel

Center Dash Panel

Remove

1. Disconnect the battery negative lead.

Center Dash Fasteners

2. Remove the lower dash panel to give access to the single screw securing the side of the center dash and release the screw.
3. Remove the glove box and floor-mounted console assembly.
4. Remove the radio and radio housing.
5. Detach the fuse box cover and remove the three screws securing the main and auxiliary fuse box body to the dash.
6. Pull the five heater control knobs off their levers.
7. Remove the two screws at the top of the heater graphics panel. Pull the panel away from the dash and remove the illumination bulbs from their

locations.

8. Withdraw the graphics panel.
9. Pry the auxiliary switch panel away from the dash.

10. Identify each switch multi-plug to aid reassembly, and disconnect them from the switches.
11. Release the three screws securing the top of the center dash to the louvre dash panel.
12. Remove the two screws securing the side of the center dash unit (front passenger side).
13. Maneuver the center dash away from the louvre dash and remove it from the vehicle.

Refit

1. Reverse the removal procedure ensuring that all electrical multi-plugs are fitted correctly and secure in their respective switches.
2. Arrange all electrical wiring and harnesses so that they do not become trapped between any mating faces.

Dashboard

Dashboard

Service Repair No - 76.46.04

Remove

Center Dash Panel|Page 10349 > < Center Dash Panel|Page 10347