Range Rover County LWB (LH) V8-4.2L (1993)
Brake Fluid Accumulator: Service and Repair
WARNING: The accumulator is precharged with nitrogen. Handle with extreme caution. DO NOT puncture or burn if disposal is necessary.
REMOVE
1. Disconnect battery negative lead.
2. Depressurize the system.
Inlet/Outlet Pipes
3. Remove the fluid inlet and outlet pipes from the accumulator.
4. Remove the wheel arch inner liner and remove the two nuts and plain washers securing the accumulator.
5. Remove accumulator.
REFIT
1. Reverse removal procedure. Check condition of sealing washers on high pressure hose. Fit new washers if necessary.
2. Carry out brake bleed procedure.