Range Rover County LWB (LH) V8-4.2L (1993)
/v8-4.2l/Page-1520001.png)
Blower Motor: Service and Repair
Heater
REMOVE
1. Remove the heater assembly.
Heater Assembly
2. Remove the left duct to footwell outlet.
3. Mark the position of vent control rod for reassembly. Disconnect by carefully prying open the plastic clip.
Harness Grommet
4. Disengage the grommet from side cover.
5. Remove the six screws retaining the side cover.
6. Remove the vacuum unit to air flap linkage.
