Range Rover County LWB (LH) V8-4.2L (1993)
Child Seat Tether Attachment: Technical Service Bulletins
Interior - Child Seat Tether Bracket Installation
No:
76/11/98/NAS
Ref:
Issue:
1
Date:
05/01/98
Child Seat Tether Bracket Installation
AFFECTED VEHICLE RANGE:
RANGE ROVER (LP)
ALL
SITUATION:
AFTER-MARKET CHILD SEATS MAY REQUIRE A TETHER TO SECURE THE CHILD SEAT
Some after-market child seats require tether brackets to be installed in the vehicle to properly secure the child seat. Rather than using a bracket that is
supplied with the child seat, Land Rover has specified a factory approved tether bracket that will not damage the vehicle's interior components.
RESOLUTION:
FIT FACTORY APPROVED CHILD SEAT TETHER BRACKETS
Upon customer request, fit up to 3 child seat tether brackets to the vehicle following the procedure below.
PARTS INFORMATION:
AWR1365
Child Seat Tether Bracket Assy. (Qty. as required)
AWR2591LUM
Bracket Cover (Qty. as required)
BTR6681LUM
Trim Stud (Qty. as required)
INSTALLATION TIMES:
Time 0.50 hrs
Child seat tether installation - each bracket
Normal warranty policy and procedures apply
REPAIR PROCEDURE:
CHILD SEAT TETHER INSTALLATION
1.
Remove top half of the tailgate aperture seal from the body flange.