Range Rover County LWB (LH) V8-4.2L (1993)
/v8-4.2l/Page-1092017.png)
1.
Examine selector rail and pins for wear and damage.
2.
Examine selector forks for wear and damage.
Note:
The selector rail and fork is only supplied as a complete assembly.
3.
Examine interlock spools for wear and damage.
4.
Remove snap ring and examine selector yoke assembly.
Assembling selectors.
1.
Rest 1st/2nd fork and shaft assembly on bench and locate pin in jaw of fork.
2.
Fit interlock spool and 3rd/4th fork and engage spool in jaw of fork.
3.
Slide spool and fork towards 1st/2nd selector until slot in spool locates over pin keeping the spool engaged in 3rd/4th fork jaw.
MAINSHAFT AND LAYSHAFT END FLOAT.
Note:
