Range Rover Sport (LS) V8-4.2L SC (2006)
Remove the brake pedal pad.
Installation
1. Install the brake pedal pad.
2. Install the brake pedal.
^
Clean the component mating faces.
^
Tighten the nut and bolt to 45 Nm (33 lb.ft).
3. Install the brake pedal clevis pin.
^
Install the clip.
4. Install the brake pedal bracket.
^
Tighten the Torx bolts to 10 Nm (7 lb.ft).
^
Secure the wiring harness.
5. Install the instrument panel access panel.
^
Secure with the clips.
6. Install the stoplamp switch.
7. Install the headlamp switch.